An elevator that is out of service can quickly become a building-wide problem. Tenants may have trouble reaching their floors, deliveries can slow down, accessibility can be affected, and property teams may find themselves fielding complaints while waiting for service.
While some shutdowns cannot be predicted, property managers and building owners can take steps to reduce elevator downtime. Consistent maintenance, accurate service records, timely repairs, and planning for aging equipment can all make elevator performance more predictable.
For commercial properties that depend on elevators every day, reducing elevator downtime starts long before an elevator stops running.
Understand What Is Causing Elevator Downtime
An elevator can be taken out of service for many reasons. Some problems develop gradually as components wear, while others occur with little warning.
Common causes of elevator downtime can include:
- Door operator and door component problems
- Worn mechanical parts
- Control system or electrical failures
- Sensor and leveling problems
- Hydraulic system issues
- Power-related problems
- Parts that are obsolete or difficult to source
- Required repairs identified during testing or inspection
The frequency of these problems can depend on the elevator’s age, type, usage, maintenance history, and operating environment.
Tracking the reason for each service interruption helps property teams see whether a shutdown is an isolated event or part of a larger pattern.
Make Preventive Maintenance a Priority
Preventive maintenance can help reduce elevator downtime by identifying developing problems before they interrupt service. During routine visits, technicians can inspect components for wear, make necessary adjustments, lubricate moving parts, and address smaller issues before they lead to more extensive repairs.
Regular inspections are also an important part of safe elevator operation. OSHA elevator requirements address inspection practices and equipment defects that may affect safety, reinforcing the importance of identifying and correcting problems as they develop.
Maintenance needs can vary based on the equipment and property. An elevator that handles steady traffic throughout the day may require a different level of attention than one with limited daily use. Equipment age, system type, operating conditions, and previous service history can also affect maintenance needs.
AllRise develops maintenance programs around these factors rather than taking the same approach with every elevator. Service can include mechanical and electrical inspections, lubrication, adjustments, safety checks, control diagnostics, and documentation of items that may need attention in the future.
Keep Detailed Elevator Service Records
Property managers should have a clear history of what has happened with each elevator.
Records should document routine maintenance, repairs, shutdowns, callbacks, testing, parts that have been replaced, and recommendations that have not yet been completed. If the same door operator, control component, or other part continues causing problems, that history can help the elevator contractor identify a recurring issue.
Service records can also help property teams plan future spending. A system that required one minor repair during the year presents a different situation than one with repeated callbacks and rising repair costs.
Good documentation turns elevator downtime into useful information rather than a series of disconnected service calls.
Report Performance Changes Before a Shutdown
An elevator does not always go from operating normally to completely out of service overnight.
Building staff and occupants may notice warning signs first. Doors may begin opening or closing more slowly. The elevator may stop unevenly at a floor. Riders may experience unusual vibration, noises, delays, or inconsistent operation.
These changes should be reported rather than ignored.
When requesting service, provide specific details about what happened. Note the floor, approximate time, direction of travel, error message, sound, or other condition associated with the problem. This information can give the technician a better starting point, especially when the issue is intermittent.
Early service may allow a developing problem to be corrected before it results in longer elevator downtime.
Pay Attention to Elevator Doors
Doors are involved in virtually every elevator trip, making door equipment an important part of ongoing maintenance.
Problems with operators, tracks, rollers, sensors, interlocks, and other door components can interrupt normal service. Heavy traffic can increase wear, while dirt or debris around entrances can create further problems.
Property teams should report doors that hesitate, scrape, repeatedly reopen, close unusually slowly, or behave differently than normal. Technical adjustments and repairs should be left to qualified elevator personnel.
Addressing door problems early can help prevent a relatively small issue from becoming an unexpected shutdown.
Plan Ahead for Aging and Obsolete Components
Preventive maintenance can extend equipment life, but it cannot make every elevator component last indefinitely.
Older elevator systems may eventually become harder to maintain because replacement parts are scarce or existing controls and mechanical components have reached the end of their practical service life. At that point, repeated repairs can lead to longer periods of elevator downtime.
Modernization can address selected components without necessarily replacing the entire elevator. Depending on the system, upgrades may include controls, door operation, signal fixtures, and other mechanical or electrical equipment. AllRise provides modernization services intended to improve reliability while planning work around a property’s operational and financial needs.
Planning these improvements before a major failure gives property teams more control over budgets and scheduling.
Schedule Planned Work Around Building Operations
Some elevator downtime is necessary. Testing, major repairs, and modernization work may require an elevator to be temporarily removed from service.
The difference is that planned downtime can be managed.
Property managers can coordinate work around lower-traffic periods, notify occupants ahead of time, plan alternative routes, and account for deliveries or other building activities. Properties with multiple elevators may also be able to sequence work so that another unit remains available.
This is especially important for modernization projects that involve several systems or require extended work.
Review Repeat Callbacks Instead of Treating Them Separately
If an elevator continues going out of service, repeatedly resetting the equipment or repairing individual symptoms may not address the larger issue.
Look at the pattern.
Is the same component involved each time? Does the problem occur on a particular floor? Are shutdowns becoming more frequent? Is the equipment becoming difficult to repair because of parts availability?
A broader equipment assessment can help determine whether the right response is an adjustment, repair, component upgrade, maintenance change, or larger modernization project.
Have a Plan for Unexpected Elevator Downtime
Even a well-maintained elevator can experience an unexpected problem, so commercial properties should know what happens when service is interrupted.
Building staff should know who to contact, how to communicate an outage to occupants, and what information the elevator service provider needs. Emergency contact information should be easy for the appropriate staff to access.
AllRise provides 24/7 elevator repair support and services major elevator brands across its service area. Its repair services are supported by stocked service vehicles and access to OEM and non-proprietary components.
A clear response plan will not prevent every shutdown, but it can reduce confusion and help the service process move more efficiently.
Reduce Elevator Downtime With AllRise Elevator
Reducing elevator downtime requires a combination of preventive maintenance, timely repairs, accurate records, equipment planning, and responsive service.
AllRise Elevator provides commercial elevator maintenance, repair, testing, modernization, and installation services throughout Missouri, Kansas, and Illinois. With offices serving the St. Louis and Kansas City markets, the company works with property owners and managers to maintain equipment and address problems before they lead to greater disruption.
If your property is experiencing frequent elevator downtime or you want to take a more proactive approach to elevator maintenance, contact AllRise Elevator to discuss your equipment and service needs.
Frequently Asked Questions
What causes the most elevator downtime in commercial buildings?
Elevator downtime can result from door problems, worn mechanical parts, control or electrical failures, hydraulic issues, power problems, or obsolete components. The cause varies based on the elevator’s type, age, use, and maintenance history.
Can preventive maintenance reduce elevator downtime?
Preventive maintenance can identify wear and developing equipment problems before they result in a shutdown. Regular inspections, adjustments, lubrication, testing, and timely part replacement can support more reliable operation.
When should an older elevator be modernized?
Modernization may be worth evaluating when an elevator experiences frequent shutdowns, has obsolete components, becomes difficult to repair, or no longer meets the property’s performance needs. An elevator contractor can assess the existing system and determine which components may benefit from upgrades.
David Ferran is the President of AllRise Elevator’s Kansas City office. With years of industry experience, he leads with a focus on safety, service, and reliability. David is committed to helping clients keep their elevators running smoothly and efficiently while building strong relationships across the Kansas City region.